Audison USS 4 Universal Speaker Simulator by Audison
Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. ) 90 / 0. If there is a need to generate a remote signal to control the amplifier turn on/off, it is necessary to power* the USS4, providing the additional feature of the possibility to delay the signal from 1 to 8 seconds, so as to avoid annoying bumps upon ignition. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. 10/5
Technical Specifications Input/Output Channels 4 Input Power Max 50 W Input Impedance 12 O Output Impedance 12 O Remote Out (only with 12 VDC Power Supply) 12 VDC 150 m
A Remote Out Delayed (only with 12 VDC Power Supply) 12 VDC 150 m
A 1 to 8 sec. 19. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. Weight (gr / lb. * In countries where the legislation on electromagnetic compatibility is not mandatory under ECE / UN Regulation no.
Tags: Audison USS 4 Universal Speaker Simulator by Audison