Aerpro APIZUSB1 USB Retention Harness (Suits Isuzu D-Max, mu-X) by Aerpro
APIZUSB1 is a USB retention adapter suitable for a selected Isuzu D-Max and MU-X vehicles that are equipped with an OEM Clarion or Fujitsu 10 headunit. The adapter simply connects to the rear USB input on the aftermarket headunit and connects to the factory plug in the vehicle. Aerpro USB retention adapters allow the factory OEM USB socket in a vehicle to be retained when installing an aftermarket headunit. Features : Plug and play solution, no cutting of wires necessary Allows the retention of the factory OEM USB socket when installing an aftermarket headunit with rear USB input Maintains vehicle aesthetics, no need to install an additional USB port in the vehicle Suitable for Isuzu D-Max & MU-X models with OEM Clarion or Fujitsu 10 Headunit Specification : CABLE LENGTH : 250mm COMPATIBILITY : AFTERMARKET HEADUNIT MUST HAVE REAR USB INPUT NOTE : Wiring configuration is different to APSUUSB1 Vehicles known to work with this product : Isuzu D-Max 2012 + Isuzu MU-X 2013 +.
Tags: Aerpro APIZUSB1 USB Retention Harness (Suits Isuzu D-Max, mu-X) by Aerpro
More products in category..
Some OEM sources / headunits have a test circuit that monitors the presence of a lowimpedance load to enable audio outputs ) 90 / 0 If there is a need to generate a remote signal to control the amplifier turn on / off, it is necessary to power the USS4, providing the additional feature of the possibility to delay the signal from 1 to 8 seconds, so as to avoid annoying bumps upon ignition...
The cable is 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed The T connection type allows the user to separately route the signal to the front midwoofer housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables...