The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come. Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability. Kit Contents : 2 Arms, Install Guide. Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering. Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come. This Whiteline kit is covered by a 3 Year / 60,000kms warranty. Providing an increase between +2. 5 and +3. Articulation voids deliver necessary suspension articulation and/or compression under loads. 5 degrees of caster and up to 1. PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing. A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height.
Tags: Whiteline KTA240 Fixed Offset Upper Control Arm by Whiteline